Your basket is empty.
Continue ShoppingSee our full range of cast iron and column radiators in person. Open Saturdays 10am to 2pm, with weekday visits available by appointment.
5-7 Coptfold Road,
Brentwood, Essex CM14 4BN
Your basket is empty.
Continue ShoppingWork out the heat output your room needs, then choose a cast iron or column radiator to match.
Choose the room, enter its width, length and ceiling height in metres or feet, then tell us how exposed it is and what glazing it has.
The calculator gives the heat output the room needs. In an older or poorly insulated property, size slightly above your figure for comfortable warmth.
Pick a style, then choose the height and number of sections that meet your figure. Our team can check your choice before you order.
BTU stands for British Thermal Unit, the standard measure of heat output across the heating industry. Every radiator has a BTU rating that tells you how much heat it gives out, and every room has a BTU requirement based on its size, insulation and exposure.
Switch the calculator above to Convector Conversion and enter the size and type of your existing radiator. It converts that output into the figure your cast iron radiator needs to match.
Yes. Cast iron radiators are a direct replacement for any existing radiator on a standard wet central heating system. Your plumber removes the old radiator, adjusts the pipework if needed to match the new valve positions and connects the cast iron radiator in its place. The most important thing is that the new radiator gives enough heat output for the room, so check your figure here before ordering.
Cast iron radiators work with all standard boiler types, including combi, system and conventional boilers. As long as your boiler has enough output to meet the total BTU demand of your radiators, everything works as it should. If you are fitting several large radiators, ask your heating engineer to check your boiler can handle the total load.
Our team is always happy to check your figures and help you get the sizing right.